We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16759

5.2i Virtex PAR - My PC crashes during the final NCD write of a design edited in XDL


Keywords: XDL, PAR, crash, PWR, VCC, GND, edited

Urgency: Standard

General Description:
PAR crashes after a design that I edited in XDL successfully passes through place-and-route. (PC only)


This failure is caused by a VCC net with a user-defined name that is shorter than the standard name usually described by MAP ("GLOBAL_LOGIC1").

This problem will be fixed in the 6.1i software release. Meanwhile, you can work around the problem by assigning a name that has 13 or more characters to the VCC net.
AR# 16759
Date Created 09/03/2007
Last Updated 10/20/2008
Status Archive
Type General Article