UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16846

5.2i Project Navigator - XPower ICON does not show up in GUI for Virtex-II Pro

Description

Keywords: Project Navigator, XPower, ICON, Virtex-II Pro, GUI, 2VP

Urgency: Standard

General Description:
For Virtex-II Pro, the XPower icon is not available in the Project Navigator GUI, even though it is supported in 5.2i.

Solution

Although the XPower icon is not available, you can run XPower as a stand-alone tool for Virtex-II Pro using one of the following methods:

- Enter "xpower" at the command prompt.
- Select Start -> Programs -> Xilinx ISE 5.2 -> Accessories -> XPower.
AR# 16846
Date Created 03/11/2003
Last Updated 02/07/2006
Status Archive
Type General Article