UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17304

5.2isp2 iMPACT - iMPACT does not allow the addition of an 18v04 to a Boundary Scan chain (automatically selects XCF04 instead)

Description

Keywords: iMPACT, 18v00, 18v04, XCF, platform, PROM, xcf04

Urgency: Hot

General Description:
iMPACT 5.2isp2 does not allow the selection of the 18v04 PROM for addition to a Boundary Scan chain. Instead, iMPACT automatically selects the XCF04S PROM.

Solution

This is the same problem as described in (Xilinx Answer 17239).

This problem is fixed in the latest 5.2i Service Pack, available at:
http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 5.2i Service Pack 3.

A patch is available on the Xilinx FTP site to correct this problem. This patch should only be used with 5.2i Service Pack 2. Please view the archived README file for installation instructions at:
http://www.xilinx.com/txpatches/pub/swhelp/ise5_updates/17239.zip
AR# 17304
Date Created 05/21/2003
Last Updated 03/11/2005
Status Archive
Type General Article