We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17468

8.2i Install - "This application has failed to start because (MSVCR71.dll/MSVCP71.dll) was not found" message is seen when running Programming Tools


Keywords: lab, DLL, Windows, path, system32, drivers

After installing ISE 8.2i Programming Tools, I receive the following message when attempting to launch iMPACT:

"This application has failed to start because (MSVCR71.dll/MSVCP71.dll) was not found. Re-installing the application may fix this problem"


This message occurs if these DLLs did not previously exist on the machine. To fix the issue, you can locate these DLLs from another machine with the same operating system or from the Internet.

This issue can also be resolved by installing 8.2i sp2 once it is released.
AR# 17468
Date Created 09/03/2007
Last Updated 04/23/2008
Status Archive
Type General Article