Main
Home  :  Support  :  Answers  :  6.1i PACE - I cannot display the QPRO Virtex Hi-Rel/Rad-Hard family devices

6.1i PACE - I cannot display the QPRO Virtex Hi-Rel/Rad-Hard family devices

AR# 17500

Search For Another Answer
Topic SW-Floorplanner/PACE
Last Updated 03/27/2007
Status Archive
Description

Keywords: QPRO, Rad, Hard

Urgency: Standard

General Description:
I cannot display the QPRO Virtex Hi-Rel/Rad-Hard families? If I choose these families, the choice is ignored.

Solution

You can work around this issue by using the same Virtex device that matches the QPRO device.

This should be fixed in the next major release (after 6.1i).
 
 
/csi/footer.htm