UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17523

6.1i iMPACT - When I program an XBR (CoolRunner-II) with OTF enabled, "ERROR:iMPACT - '1': Done bit could not be programmed correctly" is reported

Description

General Description:

When I program XBR (CoolRunner-II) devices with the "On The Fly Pattern" (OTF) enabled, iMPACT reports the following error:

"ERROR:iMPACT - '1':Done bit could not be programmed correctly."

However, the "Activate On-The-Fly Pattern" still works.

Solution

This problem has been fixed in the latest 6.1i Service Pack available at:

http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 6.1i Service Pack 1.

AR# 17523
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article