We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17695

3.2 EDK : Why can't I export a project to Project Navigator when targeting some devices?


Keywords: EST, EDK, export, project, navigator, devices, targeting

Urgency: Standard

Problem Description:
When I try to export my project to Project Navigator targeting particular devices, the export process fails. I do not see this when targeting a Virtex-II Pro. It occurs only when I am doing a MicroBlaze design and targeting some non Virtex-II Pro. How can I export my project to Project Navigator to add more logic to my design?


This is a known issue with 3.2 EDK, and has occurred when targeting the following devices:
Virtex-E, Virtex, Spartan-3, Spartan-IIE, Spartan-II

The only work-around to this problem is to install 6.1 EDK. This also requires that you have 6.1i ISE installed.
AR# 17695
Date Created 07/29/2003
Last Updated 04/28/2006
Status Archive
Type General Article