We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17742

LogiCORE 1 & 10 Gigabit Ethernet MAC, 1000BASE-X PCS/PMA - Simulation instructions for "Simulation Only" evaluation flow


Urgency: Standard 


Problem Description: 

How do I simulate the Gigabit Ethernet MAC, 10 Gigabit Ethernet MAC, or 1000BASE-X PCS/PMA cores with the "Simulation Only" evaluation flow?


The instructions for performing "Simulation Only" evaluations of the 1 and 10 Gigabit Ethernet MACs can be found on these pages in the IP Evaluation lounge (these pages are also accessible from the product lounges for these cores):  


http://www.xilinx.com/ipcenter/ipevaluation/1ge_mac_evaluation.htm  (1 Gigabit Ethernet MAC) 

http://www.xilinx.com/ipcenter/ipevaluation/10ge_mac_evaluation.htm  (10 Gigabit Ethernet MAC) 

http://www.xilinx.com/ipcenter/ipevaluation/1gbsx_phy_evaluation.htm (Ethernet 1000BASE-X PCS/PMA) 


When the core is generated, a "<user_corename>/" directory and a readme file called either "readme_<user_corename>.txt" (v3.0) or "<user_corename>_readme.txt" (v4.0) will be created. Follow the instructions in the readme file for the detailed steps required to set up and run the simulation-only evaluation.

AR# 17742
Date Created 09/03/2007
Last Updated 05/15/2014
Status Archive
Type General Article