UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17894

6.2 / 6.1 / 3.2 EDK, IPIF - The C_MIR_BASEADDR/HIGHADDR must be set regardless of the C_INCLUDE_MIR value

Description

Keywords: IPIF, MIR, BASEADDR, HIGHADDR, EDK, IP, Processor

Urgency: Standard

General Description:
The "C_MIR_BASEADDR/ C_MIR_HIGHADDR" IPIF attributes must be set regardless of the C_INCLUDE_MIR value.

Solution

This issue was addressed in EDK 6.2 Service Pack 1, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.2 Service Pack 1.


The MIR might or might not be included, depending on the value of the C_MIR_INCLUDE generic. Even if a MIR is not included, the Software Reset Register uses the "C_MIR_BASEADDR" and "C_MIR_HIGHADDR" generics. These generics are typically set to define a small address range, such as 256 bytes. The address range size must be a power of 2.
AR# 17894
Date Created 08/27/2003
Last Updated 03/05/2006
Status Archive
Type General Article