UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17967

6.1i ISE - Project Navigator crashes after running Simulate Post-Fit VHDL Model with "Fatal Error:GUIUtilities:WinApp c:657 $Revision"

Description

Keywords: CPLD, fit, simulate, error, ProjNav

Urgency: Standard

General Description:
When I generate a VHDL Simulation model using the Simulate Post-Fit VHDL Model process, ISE reports:

"Fatal Error:GUIUtilities:WinApp c:657 $Revision"

Another message then reports that the memory cannot be read.

Solution

This error occurs on CPLD designs if the Simulate Post-Fit VHDL Model process has already been run once. If you must make adjustments and rerun this process, you can avoid this error by first running Project -> Cleanup Project Files.

This problem has been fixed in the latest 6.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 6.1i Service Pack 1.
AR# 17967
Date Created 09/08/2003
Last Updated 02/07/2006
Status Archive
Type General Article