We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17968

6.1i ISE - Architecture Wizard does not show selections when I change the project device


Keywords: Project Navigator, Architecture Wizard, ArchWiz, device, properties, clocking

Urgency: Standard

General Description:
I am working on an open Virtex-II project, and I then change the project device to another device in the Virtex-II family. When I now select Project -> New Source... -> IP (COREGen and Architecture Wizard), no Architecture Wizard selections appear in the New Source Wizard.


To work around this problem, close and restart Project Navigator. The wizards for the second device will then appear.

This problem has been fixed in the latest 6.1i Service Pack, available at:
The first service pack containing the fix is 6.1i Service Pack 1.
AR# 17968
Date Created 09/08/2003
Last Updated 02/07/2006
Status Archive
Type General Article