We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17974

6.1i ISE - Closing Timing Analyzer produces an error message in the Project Navigator Console window: "can't read "_processlabel": no such variable"


Keywords: TCL, ISE, TA, Timing Analyzer, TimingAn, processlabel, process label

Urgency: Standard

General Description:
I open Timing Analyzer through a Project Navigator process such as "Post-Map Static Timing Report". Once Timing Analyzer is closed, the following message appears in the transcript window:

"can't read "_processlabel": no such variable
while executing
"filesToDelete "$DID_File" "# Implmentation : $_processlabel""
(file "<Xilinx directory>/data/projnav/scripts/_runTimingan.tcl" line 71)

OS = XP Prof."


This message may safely be ignored. The error does not stop any flow processes and addresses only the cleanup after the Timing Analyzer window is closed. You can still edit/save, etc., any files in Timing Analyzer and also later run any process downstream without difficulty.

This problem has been fixed in the latest 6.1i Service Pack, available at:
The first service pack containing the fix is 6.1i Service Pack 1.
AR# 17974
Date Created 09/08/2003
Last Updated 02/07/2006
Status Archive
Type General Article