We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17985

6.1i ISE - Project Navigator hangs when adding a remote EDK source (".xmp" file)


Keywords: EDK, .xmp. remote, network, projnav, slow

Urgency: Standard

General Description:
Project Navigator hangs, if you try to add a ".xmp" source by:

- Add Source (add a remote source)
- Add Copy of Source (copy the source to the project directory and add the copy to the project)


If Project Navigator hangs during "Add Source", close and re-launch ISE, then open the project again, the source is added correctly in the hierarchy. This situation is not usually a hang but a slow process that appears as a hang.

If Project Navigator hangs during "Add Copy Of Source", close and re-launch ISE then open the project again. The ".xmp" file should have been copied correctly to the project directory but should be added to the project with the "Add Source" process.

This problem has been fixed in the latest 6.1i Service Pack available at:
The first service pack containing the fix is 6.1i Service Pack 1.
AR# 17985
Date Created 09/10/2003
Last Updated 02/07/2006
Status Archive
Type General Article