We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18029

6.1i Virtex-II MAP - An EDK ML300 Reference Design crashes in MAP (Windows)


Keywords: EDK, ML300, reference design, crash, Running, cover

Urgency: Standard

General Description:
When run on a Windows PC, an EDK ML300 Reference Design crashes during the "Running cover..." phase of MAP and reports the following error:

"Release 6.1i - MAP G.23
Copyright (c) 1995-2003 Xilinx, Inc. All rights reserved.
Using target part "2vp7ff672-6".
Removing unused or disabled logic...
Running cover...
FATAL_ERROR:Map:Portability/export/Port_Main.h:127:1.22 - This application has discovered an exceptional condition from which it cannot recover. Process will terminate. To resolve this error, please consult the Answers Database and other online resources at http://support.xilinx.com. If you need further assistance, please open a WebCase by clicking on the WebCase link at http://support.xilinx.com"

(NOTE: This Answer Record is a good match for your problem only if a crash occurs during the mapping phase "Running cover...". The problem is not limited to the EDK design.)


This problem has been fixed in the latest 6.1i Service Pack, available at:
The first service pack containing the fix is 6.1i Service Pack 2.
AR# 18029
Date Created 09/12/2003
Last Updated 05/11/2006
Status Archive
Type General Article