We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18047

EDK - The PLB to OPB bridge simulation fails when the C_CLK_ASYNC parameter is set to "0"


Keywords: EDK, Processor IP, PLB2OPB, Bridge, Simulation, Failure

Urgency: Standard

General Description:
PLB to OPB Bridge
A simulation failure occurs during a read operation when C_CLK_ASYNC is set to 0.


This parameter is supposed to be set to 1 and not be user modifiable. It will be removed in a future software release.
AR# 18047
Date Created 09/16/2003
Last Updated 04/25/2007
Status Archive
Type General Article