UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18112

XMIL/ML361 - When I download the ".bit" file file created for the ML361 board by XMIL tool, I do not get a "PP" displayed indicating the memory test passed

Description

General Description:  

I used XMIL to target the ML361 board. I ran "dopar.bat" and created a ".bit" file from the result. When I download the ".bit" file created for the ML361 board by XMIL tool, I do not get a "PP" displayed indicating my memory test passed. Instead, just one LED lights up.

Solution

This is because the source files created by the XMIL tool are not the same as those which are shipped with the ML361 board. 

 

A ".bit" file created from the "output .ncd" from "dopar.bat" will light "LED1" to indicate that the memory interface is working.

AR# 18112
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article