UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18126

3.2 EDK - PBD Editor causes data corruption in ".mhs"

Description

Keywords: XPS, PBDE, move, copy, EDK, corrupt, corruption

Urgency: Standard

General Description:
My ".mhs" is being changed unintentionally based on data in the ".pbd" diagram. How can I avoid this?

Solution

If you have EDK 3.2 sp2, then you can turn this feature off by going to "Options -> Preferences" then selecting the top button "Redraw schematic layout to synchronize changes."

The ".pbd" will still come up when you open the project, but you can simply close it without saving changes and the ".mhs" will not be modified.

The default options have changed in EDK 6.1 to avoid these steps.
AR# 18126
Date Created 09/25/2003
Last Updated 04/06/2007
Status Archive
Type General Article