We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18204

3.1i SP1 System Generator for DSP - Devices show as "Not Installed" in SysGen block


General Description: 

After installing Service Pack 1 for System Generator 3.1, when I add a SysGen block to a new model, the target device pull-down menus all display "Not Installed".


This problem occurs because when Service Pack 1 for System Generator 3.1 was installed, the XILINX environment variable was pointing to an older ISE install, most likely 5.2i. Consequently, when you attempt to use 6.1i ISE, this problem occurs. 


To solve this problem, reinstall the System Generator Service Pack 1 with the XILINX environment variable pointing to your 6.1i install.

AR# 18204
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article