UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18230

6.1i Virtex-II MAP - A crash occurs when MAP is run with the "-timing" switch used

Description

Keywords: DDR, -timing, crash, fails

Urgency: Standard

General Description:
MAP crashes in Phase 2.2 when I run my Virtex-II design with the "-timing" option used.

(NOTE: This Answer record is only a good match for your case if the failure occurs in Phase 2.2 and the design contains DDR I/O.)

Solution

This particular failure is related to the use of DDR I/O.

The problem has been fixed in the latest 6.1i Service Pack, available at:
http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.1i Service Pack 2.
AR# 18230
Date Created 10/13/2003
Last Updated 05/11/2006
Status Archive
Type General Article