UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18281

System Generator for DSP and XtremeDSP Development Kit - Which clock on the XtremeDSP Kit does System Generator Hardware Co-Sim use?

Description

Which clock on the XtremeDSP Kit does System Generator Hardware Co-Sim use?

Solution

The page numbers are based on the following release of the XtremeDSP Kit Development Documentation: 

"NT107-0132 - XtremeDSP Dev Kit User Guide Issue 9.pdf" 

 

System Generator Uses the Programmable Clock, and will round the frequency that you entered to the nearest available programmable clock frequency. 

 

Page -- 40 Section 5.8 This section covers all of the available clock sources, and gives a list of the programmable clock frequencies. 

 

The ADCs and DACs require a free running oscillator. For details on using the ADC and DAC, see the XtremeDSP Kit User Guide and the ADC and DAC data sheets provided with the kit.  

 

Please see (Xilinx Answer 17133) for more information about using the ADCs and DACs with Hardware Co-Sim. 

 

Please see (Xilinx Answer 18267) for more information on the Xtreme DSP Development Kit clocking.

AR# 18281
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article