We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18386

6.1 Compedklib - How do I compile the behavioral models for EDK Simulation in EDK 6.1?


Keywords: compiling, libraries, CompXLib

Urgency: Standard

General Description:
How do I compile simulation models for the EDK 6.1i design tools?


1. First make sure that "compxlib" has been run. The example below compiles all of the UniSim and SimPrim models:
compxlib -s mti_se -f virtex -l vhdl -o /xsim6libs

2. Now run "compedklib":
compedklib -X C:\xsim6libs -o c:\xsim6libs\edk_nd_libs

NOTE: The order of the command line: the "-X" option specifies the libraries compiled by COMPXLIB. The "-O" option specifies where to install the "edk libs" for behavioral simulation.
AR# 18386
Date Created 11/11/2003
Last Updated 03/07/2006
Status Archive
Type General Article