We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18398

XST - "WARNING:Xst:382 - Register <1> is equivalent to <2>"


During Low-Level Synthesis in XST, the following warning message occurs: 


"WARNING:Xst:382 - Register <1> is equivalent to <2>"


This message simply means that two registers in the design have been found to have the same functionality (clk, data, and controls), either directly in the HDL source or after logic optimization.  


XST can merge these two registers if the "Equivalent Register Removal" option is enabled.

AR# 18398
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article