UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18432

6.1i ECS - Unable to connect nets to bus taps due to misalignment - "Error: Bus tap at (x x x x) is not connected to anything"

Description

Keywords: ECS, 6.1, bus, taps, nets, unable, misalignment

Urgency: Standard

General Description:
When you try to connect net to a bus tap, there might be a slight misalignment making it impossible to connect the net to the bus tap (i.e., a red box at the connection).

Solution

1

Delete the old tap and add a new one in its place. The old net should now connect to the new bus tap.

2

Save the sheet, and then close it.

When you open it again, the bus tap should be connected to the net.
AR# 18432
Date Created 11/17/2003
Last Updated 01/08/2006
Status Archive
Type General Article