UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18467

6.1i ISE - Leonardo synthesis gives Error: "Could not find wire table: xcv2p-p20-5_avg"

Description

Keywords: tcl, Mentor, Leonardo, synthesis, wire, table, Spectrum

Urgency: Standard

General Description:
When using a Virtex2Pro 50 device and Leonardo synthesis, the Leonardo script in Project Navigator executes the command "set wire_table xcv2p-p20-5_wc" which causes the message: "Could not find wire table: xcv2p-p20-5_avg" and at the end, ProjNav could not finish.

Solution

Mentor has identified the problem in the script "leospec_utils.tcl".
In file "leospec_utils.tcl", change the following line to the line under it:

xcv2p { regexp {xc2vp(.*)} $p_DevDevice match p_DevSize ; set wire_table "${target}-p$p_DevSize${p_DevSpeed}_avg" }
xcv2p { regexp {xc2vp(.*)} $p_DevDevice match p_DevSize ; set wire_table "${target}-$p_DevSize${p_DevSpeed}_avg" }

This problem has been fixed in the latest 6.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 6.1i Service Pack 3.
AR# 18467
Date Created 11/20/2003
Last Updated 02/07/2006
Status Archive
Type General Article