UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18524

6.1 EDK Install - Service Pack 2 Release Notes/README

Description

Keywords: Service Pack, 1, 2, UNIX, PC, software, update, 6.1, SP2

Urgency: Standard

General Description:
This README Answer Record contains the Release Notes for EDK 6.1 Service Pack 2. The Release Notes include installation instructions and a list of the issues that are fixed by this Service Pack for the 6.1 release.

(Xilinx Answer 18298) contains information regarding EDK 6.1 Service Pack 1.

Solution

1

A successful installation of Xilinx EDK 6.1 Service Pack 2 updates your software version number to 6.1.2.

NOTE 1: The destination directory specified during the set-up operation must contain an existing Xilinx EDK 6.1 installation. Only existing files will be updated.

NOTE 2: Set the Xilinx EDK 6.1 environment variable before commencing the installation of Service Pack 2.

Download installation instructions for PC users:

1. Download EDK_6_1_2_win.exe from:
http://support.xilinx.com/ise/embedded/edk_download.htm

2. Run "EDK_6_1_2_win.exe".

Download installation instructions for Solaris users:

1. Download EDK_6_1_2_sol.zip from:
http://support.xilinx.com/ise/embedded/edk_download.htm

2. Unzip EDK_6_1_2_sol.zip it into your "$XILINX_EDK" area.

2

Issues Fixed by 6.1 EDK Service Pack 2:

6.1 EDK SP1 - The carry bit in the MicroBlaze MSR is affected by instructions that are not executed.
Please see (Xilinx Answer 18459).

6.1 EDK - "ERROR: MDT - Failed to copy xgemag_l.c and xgemag_l.h..."
Please see (Xilinx Answer 18374).

6.1 EDK Documentation - No data sheet exists for the "lmb_bram_if_cntlr" EDK core.
Please see (Xilinx Answer 18608).

6.1 EDK - XMD/GDB does not support hardware breakpoints for code in the PPC cache.
Please see (Xilinx Answer 18609).

6.1 EDK, Base System Builder (BSB) - Designs built with DCM feedback utilizing the 2X pin do not work.
Please see (Xilinx Answer 18610).

6.1 EDK, LibGen - "xparameters.h" is not properly written for the EMC core.
Please see (Xilinx Answer 18611).

6.1 EDK - The compedklibs script compiles the wrong files for the plb_rapidio.
Please see (Xilinx Answer 18613).

6.1 EDK - Structural simulation does not work for EDK cores that use BBD files.
Please see (Xilinx Answer 18484).

6.1 EDK - XPS reports a segmentation fault on a dual MicroBlaze system.
Please see (Xilinx Answer 18614).

6.1 EDK - XPS - "ERROR File not found: ....hdl\system_bb_comps.v" when I export to Project Navigator in Verilog.
Please see (Xilinx Answer 18323).

6.1 EDK SP1 - If the instruction "BRI 0" is running from slow memory, can MicroBlaze acknowledge an interrupt?
Please see (Xilinx Answer 18458).

6.1 EDK - XMD is unable to debug a Virtex-II ProX 2VPX20 device.
Please see (Xilinx Answer 18615).

6.1 EDK, SimGen - Structural simulation netlists are not updated properly.
Please see (Xilinx Answer 18616).

6.1 EDK, SimGen - An error reports: "*** No rule to make target `-p', needed by `implementation/mblaze_wrapper.ngc'..."
Please see (Xilinx Answer 18532).

6.1 EDK - When I compile an EMAC driver, an error reports: "xemac_l.c:48: xpacket_fifo_l_v2_00_a.h: No such file or directory."
Please see (Xilinx Answer 18632).

PLB Ethernet 10/100 v1.00.a - Release Notes for the PLB Ethernet Core in EDK 6.1 SP2
Please see (Xilinx Answer 18630).

PLB Gigabit Ethernet MAC v1.00b - Release Notes for EDK 6.1 SP2
Please see (Xilinx Answer 18636).

OPB 10/100 Ethernet MAC v1.00.m - Release Notes for EDK 6.1 SP2
Please see (Xilinx Answer 18631).

NCSIM support for Windows was added with NCSIM 05.10-s012.
Please see (Xilinx Answer 19321).
AR# 18524
Date Created 12/01/2003
Last Updated 03/07/2006
Status Archive
Type General Article