UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18532

6.1 EDK, SimGen - An error reports: "*** No rule to make target `-p', needed by `implementation/mblaze_wrapper.ngc'..."

Description

Keywords: XPS, structural simulation

Urgency: Hot

General Description:
When I generate a structural simulation netlist, the following error occurs:

"Command: "i:\builds\EDK\nt\xygwin61\bin\bash.exe -c "xps -nw < run_simmodel.cmd" "
XPS% XPS% XPS% XPS% XPS% XPS% make: *** No rule to make target `-p', needed by `implementation/mblaze_wrapper.ngc'. Stop.
XPS% No changes to be saved in MSS file."

Solution

This problem is fixed in the latest 6.1 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.1 Service Pack 2.
AR# 18532
Date Created 12/02/2003
Last Updated 03/07/2006
Status Archive
Type General Article