6.1 iMPACT- System ACE MPM/SC fails to erase/program Virtex/-E
Description
Keywords: iMPACT, Virtex, E, system, ace, mpm, sc, soft, controller, fail, erase, program, config, blank, check
Urgency: Standard
General Description:
During an Erase, the quick blankcheck instruction fails on System ACE MPM/SC; or during programming, the Verify instruction fails on System ACE MPM/SC if a Virtex/-E device is in the target chain.
Solution
This problem has been fixed in the latest 6.1i Service Pack available at:http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.1i Service Pack 3.