We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18610

6.1 EDK, Base System Builder (BSB) - Designs built with DCM feedback utilizing the 2X pin do not work


Keywords: BSB, EDK, XPS, DCM, feedback

Urgency: Standard

General Description:
The Base System Builder builds several designs with a DCM utilizing 2X feedback; however, these designs do not function on the board. (This limitation only applies to Virtex-II Pro and Spartan-3 devices.)


This problem is fixed in the latest 6.1 EDK Service Pack, available at:
The first service pack containing the fix is EDK 6.1 Service Pack 2.
AR# 18610
Date Created 12/11/2003
Last Updated 03/07/2006
Status Archive
Type General Article