UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19278

6.2 EDK - ACE file generation prints a great deal of debugging output on Linux (SVFFile::shiftDR)

Description

Keywords: EDK, XMD, GENACE.TCL, ACE, SVF, Debug

Urgency: Standard

General Description:
When I generate an ACE file with:

xmd genace.tcl -jprog -board ml300 -elf ../linux/arch/ppc/boot/images/zImage.embedded -hw implementation/download.bit -ace top.ace

a great deal of debugging output is printed to the screen:

SVFFile::shiftDR(device=0, bitCount=33, mode=W, exitState=JTAG_RUN_TEST_IDLE)

Solution

This problem is fixed in the latest 6.2 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.2 Service Pack 1.
AR# 19278
Date Created 04/07/2004
Last Updated 04/09/2007
Status Archive
Type General Article