UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19296

6.2 EDK, XPS - Under the Processor and Driver Parameters tab, the GPIO v3.01.a Interrupt field is greyed out

Description

Keywords: GPIO, interrupt, handler, driver, LibGen

Urgency: Standard

General Description:
Under the Software Platform Settings -> Driver Parameters tab, if I use the "GPIO v3.01.a" and connect the interrupt port, I cannot connect an interrupt handler because the field is grey.

Solution

A new GPIO driver, "v2.00a", will be released in 6.2 SP1. This driver enables the use of interrupts.

This problem is fixed in the latest 6.2 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.2 Service Pack 1.
AR# 19296
Date Created 04/08/2004
Last Updated 04/09/2007
Status Archive
Type General Article