We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19310

6.2i BitGen - What happens to the DONE pin when configuring a device using a bitstream generated with -g ActiveReconfig?


Urgency: Standard

General Description:

If a bitstream that was generated using -g ActiveReconfig is used to program a device, what happens to the DONE pin? Does it transition Low and then High, or does it stay High?


Since using the -g ActiveReconfig flag to generate a bitstream removes the SHUTDOWN and AGHIGH commands from the bitstream, the DONE pin will stay High through the configuration process.

AR# 19310
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article