We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19348

LogiCORE FIFO Generator v1.0 - Programmable Empty Type: An incorrect GUI calculation occurs for "1_From_Empty" and "2_From_Empty"


General Description: 

On page 2 of the GUI, the Programmable Empty Type calculation is incorrect for the "1_From_Empty" and "2_From_Empty" selections. These two selections should indicate a threshold near Empty (Empty is 0). However, the current calculation incorrectly displays"1_From_Full" or "2_From_Full".


To work around this problem, enter specific numbers into the text box rather than using the pre-computed fractions "1_From_Empty", or "2_From_Empty". 


This issue will be fixed in FIFO Generator 1.1.

AR# 19348
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article