We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19411

6.2 ChipScope Pro - Programming the FPGA with ChipScope Analyzer failed


General Description: 

When using ChipScope Analyzer to program the FPGA, I receive an error indicating that the JTAG chain is lost, or that the Done signal did not go High.


To work around this problem, try using iMPACT 6.2i to program the FPGA: 


1. Run iMPACT to program the FPGA. 

2. Exit iMPACT. 

3. Run ChipScope Analyzer.

AR# 19411
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article