We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19614

MicroBlaze - PC is not reset to zero after RST is issued in XMD


General Description: 

According to the MicroBlaze reference guide: 

"When a Reset or a Debug_Rst occurs, MicroBlaze starts executing from address 0. PC and MSR are reset to the default values."


This problem is fixed in the latest 6.2 EDK Service Pack, available at: 

The first service pack containing the fix is EDK 6.2 Service Pack 2.

AR# 19614
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article