UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19770

8.1i CPLD XC9500/XL/XV CoolRunner-II - "ERROR:Cpld:849 - Insufficient number of I/O banks"

Description

CPLDFit fails with the an error message similar to the following:  

 

"ERROR:Cpld:849 - Insufficient number of I/O banks. This design needs 3, but device only supports 2."

Solution

A common mistake is to assign I/O Standards using PACE or via Constraints Editor, and skipping some I/Os. When an I/O does not have an I/O Standard assigned to it, it will be assigned the default type as specified in the Project Navigator Implementation options. If this default is different from the other I/O Standards entered, it might result in the need for an additional I/O Bank.

AR# 19770
Date Created 09/03/2007
Last Updated 05/08/2014
Status Archive
Type General Article