UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19871

9.2i EDK, LibGen/PlatGen - Comments in MHS or MSS file are removed when run through the tools

Description

Comments included at the end of a line in the MHS/MSS file will be removed. For example, given this MSS snippet: 

 

PARAMETER config_bufmalloc = true # comment 1 

PARAMETER mem_table = ((4,30),(8,20)) # comment 2 

PARAMETER static_pthread_table = ((display_TASK,2),(calc_time_TASK,2),(check_alarm_TASK,2),(sound_alarm_TASK,1),(hello_main,0)) # comment 3 

 

after running LibGen, the MSS looks like the following: 

 

PARAMETER config_bufmalloc = true 

PARAMETER mem_table = ((4,30),(8,20)) 

PARAMETER static_pthread_table = ((display_TASK,2),(calc_time_TASK,2),(check_alarm_TASK,2),(sound_alarm_TASK,1),(hello_main,0)) 

 

Notice that the comments are GONE!

Solution

Comments must be placed on a new independent line.

AR# 19871
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article