We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19898

6.2i BSDLAnno - Syntax Error on post-configuration BSDLs


General Description: 

When creating post-configuration BSDLs, there is a syntax error in the way BOUNDARY_REGISTERs are defined: 


attribute BOUNDARY_REGISTER of comp62_ise : entity is  

" 0 (BC_1, *, internal, 0)" & <---------- There is no COMMA after the ) 



" 299 (BC_1, IO_0, INPUT, X),"; <---------- This COMMA after the ) is NOT necessary 



Because of the above two syntax errors, JTAG Instruction might fail.


To work around this problem, modify the BSDL file manually.  


This problem has been fixed in the latest 6.3i Service Pack available at: 

The first service pack containing the fix is 6.3i Service Pack 1.

AR# 19898
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article