We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19985

6.3i SP1 iMPACT - Cannot program revisioned Platform Flash PROM in desktop config mode



In Desktop Configuration Mode, iMPACT will detect the xcf32p PROM, and an ".mcs" file containing 4 revisions can be added to the device. Looking at the programming options, it displays regular pogramming options but not the advanced PROM programming options. The device can be programmed with revision 0 is ok, but revisions 1, 2 and 3 will not be programmed.


This issue is resolved in 6.3i Service Pack2. 


If you need to work around this issue prior to the release of Service Pack 2, please open a WebCase at: 


AR# 19985
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article