UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19987

6.3 EDK - RevUp issues the following error: "The procedure entry point ??0Coreu_Xlicmgr@@QAE@XZ could not be located in the dynamic link library libCoreu_Interface.dll"

Description

Keywords: XPS, rev up, revup32to61

Urgency: Standard

General Description:
When opening a 3.2 project in 6.3, I receive the following error message:

Windows error:
"The procedure entry point ??0Coreu_Xlicmgr@@QAE@XZ could not be located in the dynamic link library libCoreu_Interface.dll"

Linux error:
"revup32to61
/proj/XSJbuilds/EDK/lin/EDK_Gmm.10.1/bin/lin/files_revup32to61/_revup32to61:
relocation error:
/proj/XSJbuilds/EDK/lin/EDK_Gmm.10.1/bin/lin/files_revup32to61/libMdtHardware.so
: undefined symbol: _ZN13Coreu_XlicmgrC1Ev
[williams@linux-gs11 ~]$"

Solution

This problem is fixed in the latest 6.3 EDK Service Pack, available at:
http://www.xilinx.com/ise/embedded/edk.htm.
The first service pack containing the fix is EDK 6.3 Service Pack 1.
AR# 19987
Date Created 09/16/2004
Last Updated 04/11/2007
Status Archive
Type General Article