UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20002

14.x Constraint - How do I set an OFFSET constraint depending on a clock period?

Description

How do I set an OFFSET constraint depending on a clock period, for example:

NET "clk20" TNM_NET = "clk20";
TIMESPEC "TS_clk20" = PERIOD "clk20" 20 ns HIGH 50 %;
OFFSET = IN TS_clk20*0.1 BEFORE clock;

Solution

This feature is not supported for the OFFSET constraint. However, you can create a script to write the UCF file.
AR# 20002
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE - 8.1i
  • ISE - 8.1i sp1
  • ISE - 8.1i sp2
  • ISE - 8.1i sp3
  • ISE - 8.2i
  • ISE - 8.2i sp1
  • ISE - 8.2i sp2
  • ISE - 8.2i sp3
  • ISE - 9.1i
  • ISE - 9.1i sp1
  • ISE - 9.1i sp2
  • ISE - 9.1i sp3
  • ISE - 9.2i
  • ISE - 9.2i sp1
  • ISE - 9.2i sp2
  • ISE - 9.2i sp3
  • ISE - 9.2i sp4
  • ISE - Legacy
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less