UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20087

6.3i UniSim, Simulation - CLKFX of the DCM does not restart after applying reset after the CLKIN is stopped (VHDL)

Description

Keywords: library

Urgency: Standard

General Description:
The CLKFX on the DCM does not restart after CLKIN has stopped. Applying a reset to the DCM does not make the CLKFX restart even though the CLKIN has restarted.

Solution

This problem has been fixed in the latest 6.3i Service Pack available at:
http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.3i Service Pack 2.
AR# 20087
Date Created 09/03/2007
Last Updated 10/16/2008
Status Archive
Type General Article