UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20106

LogiCORE Digital Up Converter (DUC) v1.2 - Why do I receive a message that the Digital Up Converter (DUC) is not installed when I try to access the DUC help from the System Generator User Guide?

Description

Why do I receive a message indicating that the Digital Up Converter (DUC) is not installed when I try to access the DUC help from the System Generator User Guide?

Solution

If you try to access the DUC help from the System Generator User Guide after you install the DUC, an error message indicates that the DUC is not installed. This message is incorrect, and the DUC is installed. To access the Help, perform the following steps: 

 

1. Copy the DUC from the Xilinx IP toolbox and put it into a design. 

2. Double-click the DUC block. 

3. You should then be able to click the Help button to launch the DUC help.

AR# 20106
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article