We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20146

6.2i BitGen - Certain BitGen options may increase the Virtex-II/Virtex-II Pro bit file size


General Description:

The Virtex-II and Virtex-II Pro bitstream size can vary according to certain bitstream options:

1. Device stepping level (Virtex-II only)

2. FreezeDCI


When the CONFIG_STEPPING constraint is set to '0' in the design, BitGen will generate a large bit stream. BitGen will also generate a large bit file if FreezeDCI is set to YES.

AR# 20146
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article