We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20349

6.3 EDK - Profiling of MicroBlaze code does not work with OPB_INTC


Keywords: XPS, profile

Urgency: Standard

General Description:
The profiling of MicroBlaze application code results in no time being assigned to each function. This is caused by the following in my design:
MB -> OPB_INTC -> OPB_Timer


To solve this problem, the Timer interrupt must be tied directly to the MicroBlaze interrupt pin.
AR# 20349
Date Created 11/09/2004
Last Updated 04/12/2007
Status Archive
Type General Article