UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20404

6.3 System Generator for DSP - "Post-netlisting script failed - see postnetlist.log for details"

Description

General Description:

When any design in System Generator is opened and I try to generate the code by pressing the Generate button in the System Generator token, I receive "Post-netlisting script failed - see postnetlist.log for details".

Solution

This is a generic message. The most common cause of this error is that the environment variables are set incorrectly. The following variables need to be set under the Path in System Variables:

PATH = C:\Xilinx\bin\nt;C:\WINDOWS\SYSTEM32;C:\WINDOWS;C:\WINDOWS\SYSTEM32\WBEM

XILINX = C:\Xilinx

If there is a "\" at the end of the variable, the error message will still be displayed. Be sure that the XILINX environment variable appears as shown above (where C:\Xilinx is your install directory).

AR# 20404
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article