UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20406

6.2 System Generator for DSP and XST 6.2i - Why do I get an XST error when I try to use the Resource Estimator, ChipScope, or when targeting a Hardware in the Loop target, with an Alliance ISE install?

Description

General Description: 

Why do I get an XST error when I try to use the Resource Estimator, ChipScope, or when targeting a Hardware in the Loop target, with an Alliance ISE install?

Solution

This is because you need an ISE Install that contains XST. ISE Alliance does not contain XST. 

 

Please contact your distributor for more information about an ISE Install that contains XST. 

You can also check the ISE configurations matrix: 

http://www.xilinx.com/publications/matrix/software_color.pdf

AR# 20406
Date Created 09/03/2007
Last Updated 05/16/2014
Status Archive
Type General Article