We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20570

6.3i TMRTool - "Error TMRCfg: can't open config file ./AllRegisters.txt" during Import


Keywords: TMRTool, Install, macro lib, macrolib

Urgency: Standard

TMRTool gives a large number of error messages similar to the following:

"Error TMRCfg: can't open config file ./AllRegisters.txt"


This problem is caused by an incorrectly set macro library path. The TMRTool installer does not currently set this path during installation, so this error will usually appear immediately after installing the software.

To set the Macro Library search path:
1. Select Edit -> Preferences.
2. When the "TMRTool Preferences" dialog box opens, browse to the following path:

...where $TMRTool is the installation directory. For example, if you installed TMRTool to the "C:/Program Files/ directory", you would select:
C:/Program Files/TMRTool/MacroLib

Click "OK" after selecting the macrolib directory.
AR# 20570
Date Created 09/03/2007
Last Updated 07/31/2008
Status Archive
Type General Article