UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20571

6.3i TMRTool - "Warning - Your macro lib path is not set. Please set it using the preferences dialog..." after installing TMRTool

Description

Keywords: TMRTool, Install, macro lib, macrolib

Urgency: Standard

Description:
When I am launching TMRTool for the first time after installing the software, a message appears before the tool opens:

"Warning - Your macro lib path is not set. Please set it using the preferences dialog. Normally it is set to the "MacroLib" subfolder within the installation directory."

Next, the "TMRTool Preferences" dialog box opens.

Solution

This problem is caused by an incorrectly set macro library path. The TMRTool installer does not currently set this path during installation, so this error will usually appear immediately after installing the software. See also (Xilinx Answer 20570).

When the "TMRTool Preferences" dialog box opens, browse to the following path:
$TMRTool/MacroLib
...where $TMRTool is the installation directory. For example, if you installed TMRTool to the "C:/Program Files/ directory", you would select:
C:/Program Files/TMRTool/MacroLib

Click "OK" after selecting the macrolib directory.

AR# 20571
Date Created 09/03/2007
Last Updated 07/31/2008
Status Archive
Type General Article