UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20808

10.1 EDK - "The system cannot find the path specified" error with EDK when launching LibGen

Description

When I run LibGen on a project within XPS, the following error appears: 

 

"Command bash -c "cd /cygdrive/c/My_Designs/v2pro_eval_ext_mem/; make -f system.make libs; exit;" Started... 

make: Error -- /bin/sh: The system cannot find the path specified.  

make: Error code -1  

Done." 

 

Why is this occurring?

Solution

Typically, this error occurs because a source control software (compiler) is installed on the system. This type of software can have a "make executable" that gets picked up by EDK. Borland and MKS tools have been known to create this error in EDK.  

 

To work around the error, remove all tool references in the path (with the exception of the operating system, EDK, and ISE).

AR# 20808
Date Created 09/04/2007
Last Updated 05/19/2014
Status Archive
Type General Article