We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20968

7.1 NGDBuild - LOC Constraints on lower level block RAM components (x1) are not getting passed to the pcf


Keywords: PCF, UCF, BRAM, constraint, ignored

Urgency: Standard

General Description:
I put LOC constraints on lower-level components (x1) of x2 or x4 block RAM in the ucf, but these constraints do not appear in the pcf. These constraints should be applied to the higher-level block RAM.


To work around this issue, constraint the x2 or x4 components and let the tools apply them to the lower level. This will be acknowledged in the physical constraints file.
AR# 20968
Date Created 03/11/2005
Last Updated 02/21/2007
Status Archive
Type General Article